Mobile data / eSIM troubleshooting

eSIM installed but no data abroad? Apple, Airalo and Saily checks

Tiao Tiao, the site's illustrated mascot

Pick With Context editorial deskFirst published · Last checked · About this site and how we check

Short answer

If your eSIM is installed but has no data, sort it into one of three cases: you are not yet in the coverage area, the cellular data line or data roaming is set wrong, or the APN or network selection has not been applied.

Apple says an iPhone can use one cellular data network at a time; Airalo's English pages say the new Airalo sets the APN automatically and that you can set it manually to globalapn if you cannot connect. Only when all three check out is it time to contact the merchant.

This page is for travellers who have already bought and installed a travel eSIM but get no data. It keeps the phone-side checks (Apple, Google) separate from the merchant-side checks (Airalo, Saily), and where the two merchants' own pages disagree, both versions are shown with their source.

Official pages read on 10 November 2026 (Apple US English and Taiwan pages, Google Pixel, Airalo Help Center in English and Chinese, Saily Help Center and Saily's Chinese blog). Menu names differ by phone model and OS version; this guide covers only Apple's and Google Pixel's own steps plus the Samsung and Pixel paths written by the two merchants. No speed or signal tests.Scope and limits of our checks.

Where are you stuck?

If it says activation failed before you have left home, it usually needs no action. If you have arrived and still have no signal, start with the data line and data roaming. If data works but is slow, or only the hotspot fails, go straight to the hotspot and speed question.

In this guide
01 / Sort the case

eSIM installed but no data: which case are you in?

Start with where you are. Airalo says an eSIM only works in its coverage area, and if you install it outside that area you have to wait until you arrive to connect. If an iPhone shows "activating" or "activation failure" before you reach your destination, Airalo says the eSIM is in fact fully installed and activation finishes once you are in the coverage area.

eSIM no-data symptoms and what to check first (official troubleshooting pages) (checked 2026-11-10)

The table scrolls horizontally. Keyboard users can Tab to the table and use the arrow keys.

What you seeCheck firstOfficial source
Not abroad yet, shows activating or activation failureUsually nothing; it finishes when you reach the coverage area and connect to a supported network. If you are setting up the new Airalo for the first time, Airalo says to go to Packages, open Device Options and select Retry device setupAiralo: eSIM stuck activating on iOS
Arrived, status bar shows No Service or SOS onlyAirplane Mode off, eSIM line on and selected for cellular data, data roaming on for that numberApple data roaming page, Airalo troubleshooting
Signal bars but no internetWhether the APN is applied, whether you are on a network the merchant lists, other SIMs temporarily offAiralo troubleshooting, Saily iOS/Android troubleshooting
Internet works but is slowWhether an Unlimited plan has hit its slowdown threshold, local signal and congestionAiralo slow internet (English page)
Phone has data, hotspot does not share itCellular data turned on, hotspot APNApple Personal Hotspot, Airalo hotspot page

Airalo calls Airplane Mode one of the most common reasons devices fail to connect to a mobile network; after turning it off, wait a few seconds for the phone to start searching for networks.

02 / iPhone

How do you check the data line and data roaming on an iPhone?

Apple says your iPhone can use one cellular data network at a time, so make sure cellular data is set to the eSIM and not to your home number. The path is Settings > Cellular > Cellular Data, then tap the eSIM.

  1. No Service or SOS only in the status bar: Apple says that with Dual SIM or Dual eSIM, turn on Cellular Data, tap the number you want to modify, then Cellular Data Options, and make sure Data Roaming is on.
  2. Turn on Airplane Mode for about 30 seconds, then turn it off and let the iPhone pick a network again (Apple).
  3. Wrong date and time after arrival: Settings > General > Date & Time, turn on Set Automatically (Apple).
  4. Allow Cellular Data Switching: Apple says turning it on lets the iPhone use cellular data from both plans depending on coverage. Apple separately says the automatic switching during a call does not work while you are using Data Roaming; the Airalo and Saily setup steps both say to turn it off.
  5. Still nothing: Apple says to try another SIM or contact the carrier; for a travel eSIM, go on to the merchant's troubleshooting steps.

Saily's iOS troubleshooting page lists ten steps in this order: make sure the plan is active, disconnect from Wi-Fi, Airplane Mode on for 15 seconds then off, turn on Data Roaming, check the line is on and chosen for mobile data, disable 5G, configure the APN, reboot, reset network settings, and select the provider given by Saily manually. Airalo says iOS lets you turn data roaming on per SIM, so keep it off for your primary SIM to avoid your home carrier's roaming charges.

03 / Android

Which switches matter on Android and Pixel phones?

Google says only one SIM can be the default for data on a Pixel, and the settings live under Settings > Network & internet > SIMs, along with roaming, preferred network type, network operator and access point names. Airalo says data roaming on Android usually applies to all SIMs in use, so turn off your primary SIM first to avoid roaming charges. Google says some of these steps work only on Android 11 and up, and the options vary by phone and Android version.

  • Mobile data: choose the eSIM (Google, Airalo).
  • Roaming: on a Pixel, tap the eSIM on the SIMs page and turn on roaming; Saily says Android steps may differ from device to device.
  • Preferred network type: Saily says disable 5G and choose 4G or 3G; Airalo says if 5G will not connect, try 4G/LTE or 3G.
  • Manual network selection: Airalo says turn off automatic selection and pick a network listed in the app; Saily says contact support if the option does not exist.
  • Calls and Messages options: Airalo says they may appear for a data-only eSIM on Android, but selecting them adds neither calling and texting nor a phone number.

On a Pixel, Reset Mobile Network Settings is under Settings > System > Reset options (Google). Saily says resetting network settings restores network-related settings to factory defaults, including data roaming and the APN, so you will need to turn roaming back on and re-enter the APN.

04 / APN

Do you need to enter the APN yourself? What Airalo and Saily each say

Both merchants say the APN is set automatically in most cases; whether you need to enter one depends on the connection instructions for that eSIM in the merchant's app. Airalo says that if the app lists no APN, your eSIM is configured automatically and nothing else is needed; if you do need to enter one, type it exactly as shown, all lowercase with no spaces, and leave the other fields blank.

Airalo and Saily APN instructions compared (quoted from each merchant's pages; conflicts shown side by side) (checked 2026-11-10)

The table scrolls horizontally. Keyboard users can Tab to the table and use the arrow keys.

MerchantPageWhat it says about the APN
AiraloTroubleshooting, APN and hotspot pages (English)The new Airalo sets the APN automatically; with no internet, check the Airalo line's APN is Automatic, and if not, set it manually to globalapn
AiraloSame troubleshooting and APN pages (Chinese)Some eSIMs need an APN entered: copy it from the app's installation instructions, for example globaldata; no globalapn sentence
SailyiOS troubleshooting pageEnter wbdata in the APN fields for both Mobile Data and LTE Setup; leave other fields blank
SailyAndroid troubleshooting pageAdd an APN with wbdata in both the name field and the APN field; leave other fields blank
SailyActivation pageAndroid: if the APN is missing, keep the Saily app open for up to 5 minutes for automatic configuration; iOS: if the APN is missing or the connection fails, contact support

Which to follow: Airalo's globalapn appears only on the English pages and only for the new Airalo, while the Chinese pages say to use the value shown in the app, so go by the connection instructions for that eSIM in the app. Saily's two pages differ for iOS, one saying to enter wbdata and the other to contact support, so check with Saily support before entering it by hand. Airalo adds that if the phone does not connect right after an APN change, restart it to apply the setting.

05 / Hotspot and speed

Hotspot not sharing, or data very slow: is the eSIM at fault?

Not necessarily. Apple says that if Personal Hotspot is dimmed or unavailable, first make sure Cellular Data is turned on; Personal Hotspot also requires a carrier that supports it, and the number of devices that can join depends on the carrier and iPhone model. Airalo says you can use a hotspot with your eSIM as long as your device and the network support it.

  • Airalo hotspot APN: the English page says the new Airalo sets the APN automatically; if the hotspot does not connect, check it is automatic, and if not, set it manually to globalapn in the Personal Hotspot APN field. For a public Airalo eSIM that needs a manual APN, enter the same value in the hotspot APN field too.
  • Saily hotspot: data shared through a hotspot comes out of the eSIM's data balance and Saily's fair use policy applies; Saily's South Korea page says there are no hotspot restrictions. Both statements stand; for allowances and speed limits, Saily's fair use policy in its Terms of Service governs.
  • Airalo slow speeds (English page): on an Unlimited package, speed is reduced once you use 3GB within 24 hours, and the allowance resets every 24 hours from your activation time, which Airalo calls expected behaviour, not a connection fault. The Chinese version of the same page does not include this paragraph.
  • Other causes Airalo lists: network congestion, local carriers prioritising their own users, signal strength, and device settings or outdated software.

Airalo's speed steps are Airplane Mode on for 30 seconds then off, power the phone off for a minute and back on, try each supported network manually, and switch to 3G temporarily. Only after these steps move on to resetting network settings.

06 / Still not working

Tried everything and still no data: what next?

The last two steps are resetting network settings and contacting the merchant. Airalo says a network reset clears saved Wi-Fi networks and passwords, VPN configurations and APN settings, so only do it if you are comfortable re-entering them; Saily also says a reset restores data roaming and the APN to factory defaults.

Ask the merchant before deleting the eSIM to reinstall it: Airalo's help center says that if a direct installation fails on the public Airalo, tapping View options gives self-service tools depending on the situation; Saily's Chinese blog lists removing and reinstalling as one fix; and Airalo's blog, last updated 31 October 2024 and written for the public Airalo, says eSIMs can only be installed once. Airalo says the new Airalo app opens without active data so you can view troubleshooting guides or contact support; Saily's blog says Saily itself is not a mobile carrier, so the connection depends on your device settings and the local network.

If you have not bought or installed yet, the setup order is covered in the travel eSIM activation checklist; whether your phone is locked or supports eSIM is in the travel eSIM checklist.

Not bought a Japan eSIM yet? When Airalo or Saily applies

This page is for people who have already bought one. Only if you have not bought yet, have confirmed your phone is unlocked and supports eSIM, and only need data in Japan, look at these two merchants' Japan plans. If your phone is locked, you need a Japanese number for texts, or your home carrier's roaming already meets your needs, this step does not apply. The points are from the two merchants' help pages, checked on 10 November 2026.

  • Airalo: an eSIM only works in its coverage area; the English pages say the new Airalo sets the APN automatically, with globalapn as a manual fallback; the English slow-speed page also says Unlimited packages slow down after 3GB within 24 hours.
  • Saily: plans activate automatically on arrival if you have turned on the eSIM and enabled roaming; hotspot data comes out of the eSIM's balance under the fair use policy; the two Saily pages differ on manual APN for iOS, so check with support.

The two links open the Airalo Japan eSIM page and the Saily Japan plan page; refund terms for both merchants are in the travel eSIM checklist, and the currency and total with fees are as shown at checkout.

Merchant pages were read on 10 November 2026 and do not represent that day's availability.Check the currency before you pay.

Affiliate disclosure: if you book through the links below, we may earn a commission. Decide based on your own needs and total cost.

View Airalo Japan eSIM conditions →

View Saily Japan plan conditions →

Not bought a South Korea eSIM yet? When Airalo or Saily applies

Only if you have not bought yet, your phone is unlocked and supports eSIM, and you only need data in South Korea with no Korean phone number, look at these two merchants' Korea plans. If you need a Korean number to receive verification texts, these two do not cover it. The points are from the two merchants' South Korea pages, checked on 10 November 2026.

  • Airalo South Korea: main network shown as SK, with data-only and unlimited options; with renewals on, the package renews automatically when 10% of data remains.
  • Saily South Korea: activates automatically on arrival if the eSIM is on and roaming is enabled; all plans have a 180-day activation period and then activate automatically; the South Korea page says there are no hotspot restrictions, while the help center says Saily's fair use policy applies to hotspot use.

The two links open the Airalo and Saily South Korea plan pages; refund terms are in the travel eSIM checklist, and the currency and total with fees are as shown at checkout.

Merchant pages were read on 10 November 2026 and do not represent that day's availability.Check the currency before you pay.

Affiliate disclosure: if you book through the links below, we may earn a commission. Decide based on your own needs and total cost.

View Airalo South Korea plan conditions →

View Saily South Korea plan conditions →

07 / FAQ

Frequently asked questions

My eSIM says activation failed before I have left home. What now?

Airalo says this usually happens when the eSIM is installed but you have not arrived yet; it is fully installed and finishes activating once you reach the coverage area and connect to a supported network; if you are setting up the new Airalo for the first time, Airalo says to go to Packages, open Device Options and select Retry device setup.

Should I set the Airalo APN to globalapn?

Airalo's English pages say the new Airalo sets the APN automatically and, if you have no internet and the APN is not automatic, to set it manually to globalapn; the Chinese version of the same page has no such sentence and says to use the value in the app's installation instructions. Go by the connection instructions for that eSIM in the app.

Should I enter wbdata as the APN for Saily on an iPhone?

Saily's two pages differ: the iOS troubleshooting page says to enter wbdata in the APN fields, while the activation page says iOS users with a missing APN or failed connection should contact support. Check with Saily support before entering it by hand.

Can I delete the eSIM and reinstall it?

Ask the merchant first. Airalo's help center says that if a direct installation fails on the public Airalo, View options gives self-service tools depending on the situation; Saily's Chinese blog lists removing and reinstalling as one fix; and Airalo's blog, last updated 31 October 2024 and written for the public Airalo, says eSIMs can only be installed once.

Why will my hotspot not turn on?

Apple says that if Personal Hotspot is dimmed, make sure Cellular Data is on, and that it requires a carrier that supports Personal Hotspot; Airalo's English page says that with the new Airalo, if the hotspot does not connect, set globalapn manually in the Personal Hotspot APN field.

Sources and scope

Which official pages should you check before you go?

The pages below are Apple's and Google's device help and the official help centres, blogs and product pages of Airalo and Saily; where Airalo's English and Chinese versions differ, the guide says so.

Affiliate disclosure: the Airalo and Saily links in this guide are affiliate links; if you buy through them, we may earn a commission, which does not affect the terms stated.

Practical choices. Official sources. Room for a backup plan.

Back to all travel guides
Source-check details: On 10 November 2026 we read the same Airalo help articles in English and Chinese (troubleshooting, APN, slow internet, stuck activating), the Airalo hotspot and calls-and-texts articles and its blog setup guide (updated 31 October 2024); Saily's iOS and Android troubleshooting, activation, hotspot and data roaming pages (read as visible text in a browser) and its Chinese blog (19 May 2026); Apple 109317, 109037 and 111785 in US English and 109322 on the Taiwan site; and Google Pixel 2926415 in English. Airalo's English and Chinese versions differ in two places: the English pages include the globalapn sentence and the Unlimited 3GB-per-24-hours slowdown paragraph, the Chinese pages do not; this guide quotes the English wording and labels it. Saily's two pages give different iOS APN instructions; both are shown. Google's general Android troubleshooting URL returned 404, so only the Pixel page is used. Nothing was tested on a device.Corrections and newer official information: see About and corrections.